How To Photograph Fireworks For Canada Day or 4th Of July!

firework3The annual Canada Day and Fourth Of July celebrations are upon us, so it’s a perfect opportunity to get great photographs of fireworks!  Here are some tips on how to do just that!

SETTING UP
#1 most important step! USE A TRIPOD!

I can’t stress that enough. If you don’t have a tripod, find something you can steady the camera on, or you will not get any sharp images.

Choose a good vantage point to take photographs from is also important.  Try to find an area that has as little ambient light as possible (street lights, businesses, etc) so you don’t get light leaking into the lens.

In Saint John, there are a few options. I’m going to assume they are launching from market square, but it might also be from long wharf. If you want to get the Harbour Bridge in the frame, go by the Harbour Passage interpretation centre/gazebo thing near the base of Bentley Street and Chesley Drive. However, I’ve found this from vantage point, the Bridge does cut through the fireworks depending on how high in the sky they are. If you want just the fireworks with the boardwalk in them, head to under the harbour bridge at HMCS Brunswicker. From atop Fort Howe, you will get good shots of the fireworks with the west side of the port in there. Another high vantage point that would get the boardwalk would be atop Martello Tower on the West Side.
For those in Fredericton, you have two options. Down by the lighthouse, you get a nice angle where you can get the Westmoreland Street Bridge in the background(as below), or you can go across to the North Side and get the Downtown in the background!

For those elsewhere, just find a nice vantage point that gives you lots of space for the fireworks in the sky, or a nice view with the city scape.  If you’ve got a famous monument or building, by all means, put it in the frame!

LENS
-most of your shots will be with your 18-55/18-70mm lenses, more likely at 55mm or 70mm. That way you can zoom in a bit on the fireworks. You can use your 70-300 if you want to zoom in on the bursts or try some creative techniques!

FIREWORKS2007019 FIREWORKS2007018

CAMERA SETTINGS
-for ISO, you can use 100 as the fireworks are very bright, up to 400 if you like. If you are using a point and shoot style camera, not an SLR, i would recommend the lowest ISO possible(50-100)
-for WHITE BALANCE, try DAYLIGHT(SUN icon) if you want a warmer tone, or use INCANDESCENT/TUNGSTEN(little bulb icon) to get truer colours. FLOURESCENT BALANCE(long glowing tube) gives a bit in between. See example image below with the various whitebalances. If you shoot in RAW, you can always change this later.

fireworkswhitebalance_1

-use manual focus. as the camera won’t be able to lock the focus on the fireworks. Let one firework go up and focus on that, then don’t change your focus. If you don’t have a manual focus, lock the autofocus on the buildings in the background.

-Use your remote control or cable release! This will help prevent camera shake that can happen even when you are on the tripod.


MORE TIPS BELOW!

I hope you find these tips useful! If so, it would be awesome if you would check out my LearnPhoto365 Photography Assignment Generator Apps on the app store and the Google Play store, a unique photography app that's meant to inspire you to take great photos!

Perfect for anyone taking part in a Photo 365 challenge, there are over a hundred individual assignments and hundreds of thousands of potential random ones. Versions available for both iOS and Android including free versions so you can try them out! Full details, including reviews and tour videos of the apps can be found at www.learnphoto365.com/apps Even if you only download the free version that would help get it up the app store lists!


 

GETTING THE RIGHT EXPOSURE
-Use manual shooting mode(M), as the more automatic modes won’t be able to get the exposure right.
-for exposure, start by setting your aperture/F-Stop to F16 if using ISO 400, F11 for ISO 100. (if you are using a point and shoot camera, you may not be able to go to F11, go to F8) If the fireworks are too bright, select a higher aperture number to darken things down.
-for shutter speed, it all depends on how many bursts you want to capture. Choose a speed between 1-2 seconds to record a single burst, up to thirty seconds for multiple bursts. Also, the longer the shutter speed, the more ambient exposure will be recorded, so if you want the cityscape or crowd, longer speeds will do it.

Just be careful not to go TOO long, as you may start getting too much ambient light from the city scape or surroundings recorded. One way to avoid this would be to cover the lens in between firework bursts so it won’t record the ambient the whole time. A long exposure can also begin to record smoke or haze in the sky from the fireworks.

 

5 seconds recorded two bursts
30 Seconds recorded some of the crowd along with the bridge, and the fireworks.
Over thirty seconds began to record the haze in the sky and wash out the fireworks.
The exposure for the fireworks will also be the same for exhibition and fair rides, so if you have one in your city or town, incorporate them in the photo as well!

 

GETTING CREATIVE
Once you’ve gotten a few good shots, you could try throwing on your telephoto zoom and try doing some shots where you zoom the lens during the exposure (below) or jiggling and rotating the camera.

FIREWORKS-ZOOM

 

You may also be handing our sparklers to the kids, check out this post on photography fun with sparklers!
If you have any questions, send me an email noel@learnphoto365.com

Happy shooting, and enjoy your national celebrations!

Noel Chenier
———-
Photographer and teacher
Connect with Noel on INSTAGRAM or TWITTER or via EMAIL 
Photography Assignment Generator Apps now available on the app store!
Noel’s Portfolio
Work Done by My Students!


SHARE THIS!

Think someone you know would like this content? Why not share it with them!


More Photo Tips

  • Started a 365 Photo Challange On January 1st?

    Started a 365 Photo Challange On January 1st?

    Along with New Year’s resolutions, one of the things that usually happens on January 1st is that many photographers begin a challenge to take at least one photograph a day. And like many New Year’s resolutions, it’s something that many don’t finish! I thought I’d give some tips on keeping …
  • Photoshop Tutorial: Create A Lunar Eclipse Composite

    Photoshop Tutorial: Create A Lunar Eclipse Composite

    If you shot the various sequences of the Lunar Eclipse, it’s great to combine them together in one image. Here’s a tutorial on how to do that in photoshop! (4167)
  • Ask Noel:Do I Need To Buy A Light Meter?

    Mike P asks: “Are hand-held light meters still useful? Should I invest in one?” When photography first began, camera’s didn’t have built in meters. You had to buy a hand held device, called a light meter, which would give you the correct settings. As technology improved, companies began to install …
  • Photo Critiquing Test Video

    Photo Critiquing Test Video

    So I’ve finally gotten around to putting together my first photo critique video, an idea I’ve wanted to do for a while and just never go to finishing…(like many of my ideas) Here is the first one, I would really love to know what you think about it. Tweet Please …
  • How To Photograph The Lunar Eclipse on November 8th

    How To Photograph The Lunar Eclipse on November 8th

    A super awesome lunar eclipse is happening in the early morning hours of Tuesday, November 8th. Most of Eastern Asia/Australia and Western North America are the prime viewing areas and will be able to witness the entire event, but those of you in North America/Central America will get to see …

(1464)

Leave a Comment

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.